Pay attention to the maintenance of the compressor
The condenser header aluminum pipe manufacturer supplier recommends that the compressor should be operated for ten minutes every two weeks after the refrigeration system is discontinued.The advantage of collecting pipe manufacturers is that the cooling oil can be transferred to the oil seal, prevent oil seal lack of oil, to ensure the sealing effect;On the other hand, because the compressor is precision components, long time no, its precision of surface will produce "cold welding" phenomenon, refrigerant and frozen oil will produce chemical change, easy at point with surface erosion, destroy the smoothness and accuracy of the parts, through the regular operation of the compressor, can prevent "cold welding" and points.The DC pipe manufacturer also reminds you to check the tension of the compressor belt and check the refrigerant oil for leakage
Two, pay attention to the maintenance of the condenser
The condenser header aluminum pipe manufacturer supplier emphasized that in order to ensure the normal operation of the whole air conditioning system and the good refrigeration effect, it is very important to keep the condenser surface clean.For this purpose, the collector pipe manufacturer reminds the condenser to be cleaned frequently to prevent oil, soil and other sundries from attaching to the condenser.Do not knock down the condenser radiator while cleaning, and do not damage the pipeline;At the same time also need to pay attention not to use the high pressure water gun to clean the radiator, in order to avoid damage radiator;You should also clear the gap between the condenser and the radiator to prevent clogging.
3. Maintain the evaporator
The condenser header aluminum pipe manufacturer supplier introduced that the air filter net installed at the inlet of evaporator should be cleaned once a week to avoid dust and sundries adsorbed on the air filter net in the car, obstructing air circulation and causing insufficient cooling capacity.The concentrator tube manufacturer also found that the evaporator is a heat exchanger like the condenser, so it is required to keep the vent clean, the drainage channel unblocked, and the blower running normally.When the car is in maximum refrigeration, the collector pipe manufacturer reminds you to pay attention to check whether there is engine hot water leakage through the warm water valve, so as not to affect the refrigeration effect.
